This bed will arrive as a pre-assembled frame and a set of four legs. Simply insert the legs into each corner socket and twist by hand until tight and the bed is ready for use.

The frame and legs are made from 100% aluminum, including the corners (which are simply powder-coated black). The bed sling is made from 1200D ripstop ballistic polyester fabric, and the inner padding is 100% polyester fiberfill batting. The ripstop fabric has both a PU backing to make it water-resistant and a DWR coating to repel water. Each leg has a rubber foot cap to keep the bed from sliding.

The Chew Proof Armored™ Padded Elevated Dog Crate Bed is the only elevated bed that has a padded sling. It gives your dog a bit of extra comfort and helps keep them warm in the winter months, but it won’t work as well for cooling as the non-padded ripstop or mesh elevated beds.

This is an Open Box item, and as such, does not come with a warranty against dog-related damaged. However, if the item arrives with damage from transit, it qualifies for a replacement or warranty store credit under our 30-Day Manufacturer's warranty. Please note that this warranty does not apply to cosmetic marks or imperfections, as these are expected with Open Box items.

 Simply wipe the bed down with a damp cloth or scrub away any stubborn spots with soap and warm water. Most soaps and detergents are fine, but avoid using bleach—it can damage the frame.

For a more thorough cleaning, you can disassemble the bed with a 4.5 mm allen wrench and machine wash the center pad. Wash with cold water on delicate and machine dry on low heat until it is fully dried out, then replace on frame.

Since the center of this bed is padded for comfort, it can be used with or without legs. No tools are required to remove the legs—just twist by hand until loose. If you’d like to purchase a set of rubber plugs to fill in the corner sockets, simply contact our customer care team for further assistance.

First, remove the plastic pan or tray from the bottom of the crate. Then slide the bed through the crate door at a diagonal before you add the legs. Once it’s in the crate, reach in and add a leg to each corner socket, twisting by hand until tight. Level the bed out and lower it until the feet touch the floor and it is good to go.

Yes, you can! This bed can be personalized with heat-transfer vinyl text.

To add it, just select the option to add personalization, select the vinyl color and font, and make sure to type in what you want to have personalized. Personalization is case-sensitive and will appear exactly as typed.

For best results, check out our size guide. This bed is designed to fit standard wire crates but crate dimensions can vary slightly by manufacturer, so make sure to compare the actual dimensions of your crate against those for the bed size you’re interested in. The dimensions shown for our beds are exact, and due to their rigid frames these beds will not fit in spaces smaller than their size.

For use outside a crate, measure your dog from the tip of the nose to the base of the tail and use that as the minimum length the bed needs to be for your dog to lie on it comfortably. Remember that the frame takes up an inch of space from each side, so the sleeping area is 2" smaller in each dimension from the total bed size.

We do! You can find our replacement pads sold separately here.